The speed bleed buttons are a triple sealed push button valve assembly using two, piston and cylinder type o-ring applications in each valve to eliminate leakage of any kind, fluids or air in or out of the fork assembly. Just 2 pounds of pressure can change the suspension balance front to rear. Often what is lost with pressure in the fork is that Plush feeling and the confidence that goes with it. So start by topping out your forks, then bleed off any built up pressure. This topping step is important so that you do not create a vacuum when they are topped. This condition would lower the front end ride height overall and alter your handling. *A low 3/8 installed standoff height.
4mm Thread - for White Power Forks - Fits models 2000-2010
We have made this guard Strong and light by using 7075 Alu. The window through the center of the part takes weight off and does not trap mud, as other designs do! Of course it protects the Clutch slave cylinder from debris that may be thrown its way by the chain.
This Slave cylinder needs protection as repeated pounding by the chain can damage it and brake fluid leakage here means failure.
US Patent Issued to System Tech Racing
Great news , the US Patent office issued our inventive little Speed Bleed Valve
a US Patent # 7,231,939 B. Sighting 9 special points, Dual Pistons , Self Cleaning and Low stand off heigth.So do not be fooled by the IMPORT INFERIOR KNOCK OFFS. If it
doesn’t say STR it not the ORIGINAL and it will not measure up.
