|
|
|
|
|
|
Height Adaptor
|
|
Our Price: $14.95
|
|
|
This part is needed to adapt Speed Bleed Valves to Hon CR85/CRF 150, Kaw KX 85/65, Kaw KX-F 450F, Yam YZ 85, and Suz RM 85.
|
|
|
|
|
|
|
|
|
|
KYB Internal Fork Cap Tool
|
|
Our Price: $27.95
|
|
|
KYB Internal Fork Cap Tool
|
|
|
|
|
|
|
|
|
|
P/N 95-05 KTM WP Fork Wrench / Multi Tool
|
|
Our Price: $28.95
|
|
|
KTM WP Closed Chamber, Three function Multi Wrench.
Applications: Both inner and outer caps of the WP Close Cartridge fork.
This is a Three function wrench, saving you $, other companies have you buying 2 wrenches to get the job done.. The Screws on the small end of the wrench, fits the "Inner Cap" or Bladder assembly. The Large Hex end drives the outer cap. The Slot inside is to hold the Damper rod. Used to change spring preload, add or change oil level or seal service. This is a professional quality wrench, laser cut from 1/8 steel. Your satisfaction Guaranteed, All S.T.R. products are Made in U.SA.
|
|
|
|
|
|
|
|
|
|
Fork Service Wrench KYB/Showa 49/50
|
|
Our Price: $32.95
|
|
|
Fork Cap Wrench KYB/Showa 49/50
|
|
|
|
|
|
|
|
|
|
Speed Bleed Fork Valves (pair)
|
|
Our Price: $34.95
|
|
|
These are the Patent Pending Original Speed Bleed Buttons.The Tripple Sealed push button valve assembly using two, piston and cylinder type o-ring applications in each valve to eliminate leakage of any kind, fluids or air in or out of the fork assembly.
They are the Rock Solid reliable way to quickly purge built up pressure from your front forks.
|
|
|
|
|
|
|
|
|
|
Speed Bleed Buttons KTM All Models through 2013, Fork Pressure Release Valves
|
|
Our Price: $34.95
|
|
|
The speed bleed buttons are a triple sealed push button valve assembly using two, piston and cylinder type o-ring applications in each valve to eliminate leakage of any kind, fluids or air in or out of the fork assembly.
They install in just 5 minutes (no modifacation). Remove the stock Bleed Screws and thread in the STR Bleed Valves with the supplied wrench.
|
|
|
|
|
|
|
|
|
|
Speed Bleed Fork Valves (pair) - BLUE - Husaberg
|
|
Our Price: $34.95
|
|
|
The speed bleed buttons are a triple
sealed push button valve assembly using two, piston and cylinder type
o-ring applications in each valve to eliminate leakage of any kind,
fluids or air in or out of the fork assembly.
They install in
just 5 minutes (no modification). Remove the stock Bleed Screws and
thread in the STR Bleed Valves with the supplied wrench.
Just 2 pounds of pressure can change the
suspension balance front to rear. Often what is lost with pressure in
the fork is that Plush feeling and the confidence that goes with it. So
start by topping out your forks, then bleed off any built up pressure.
This topping step is important so that you do not create a vacuum when
they are topped. This condition would lower the front end ride height
overall and alter your handling. *A low 3/8 installed standoff height.
4mm Thread - for White Power Forks - FITS: All Husaberg Models -2012, with WP fork
|
|
|
|
|
|
|
|
|
|
Compression/Rebound Adjuster KTM (Orange)
|
|
Our Price: $34.95
|
|
|
The stock plastic adjuster is hard to grip (3 sided)and turn. Also, it is difficult to read which way to rotate for Harder or softer setting.
Applications: All KTM models with top flat-head screw mounting.
This 4 sided design offers good grip (with gloves on), and we engraved the + / - (hard/ soft) as well as
rotational arrows. Safe, quick adjustments are easily handled.
Feel the difference, one click at a time. Either compression or rebound, you will be changing the "Ride Height" of the front end. Affecting the handling of the motorcycle for that days conditions. Oh Yea !
Compression adjustment on Closed cartridge SX/XC models. (shown)
Rebound adjustment on Open Cartridge XCW/EXC models.
|
|
|
|
|
|
|
|
|
|
Compression/Rebound Adjuster Husaberg (Blue)
|
|
Our Price: $34.95
|
|
|
Package includes a pair of machined and anodized suspension adjusters.
Applications: All Husaberg models with flat-head screw mounting.
Fits in place of the stock plastic item on WP forks.
Improved grip, one hand / glove on.
Compression adjustment on Closed cartridge SX/XC models. SHOWN
Rebound adjustment on Open Cartridge XCW/EXC models.
|
|
|
|
|
|
|
|
|
|
Compression/Rebound Adjuster KTM (Polished)
|
|
Our Price: $34.95
|
|
|
Package includes a pair of machined and anodized suspension adjusters.
Applications: All KTM models with top flat-head screw mounting.
Fits in place of the stock plastic item on WP forks.
Improved grip, one hand / glove on.
Compression adjustment on dual cartridge SX/XC models.
Rebound adjustment on XCW/EXC models.
|
|
|
|
