 |
 |
 |
|
The speed bleed buttons are a triple
sealed push button valve assembly using two, piston and cylinder type
o-ring applications in each valve to eliminate leakage of any kind,
fluids or air in or out of the fork assembly.
They install in
just 5 minutes (no modification). Remove the stock Bleed Screws and
thread in the STR Bleed Valves with the supplied wrench.
Just 2 pounds of pressure can change the
suspension balance front to rear. Often what is lost with pressure in
the fork is that Plush feeling and the confidence that goes with it. So
start by topping out your forks, then bleed off any built up pressure.
This topping step is important so that you do not create a vacuum when
they are topped. This condition would lower the front end ride height
overall and alter your handling. *A low 3/8 installed standoff height.
4mm Thread - for White Power Forks - FITS: All Husaberg Models -2011, with WP fork
|
|
|
|
|
|
|
|
|
