You are here: Home > GasGas
Choose a sub category:
Brakes Controls Engine
Guard Suspension Tools
Sort By:
Page of 1
ADAPTER (KTM Oil Drain Tool) ADAPTER (KTM Oil Drain Tool)

P/N: 95-15

Our Price: $15.00
MOUNT (Hand-Guard End Inserts) MOUNT (Hand-Guard End Inserts)

P/N: 77-01

Our Price: $16.00
CAP (Oil Filler) CAP (Oil Filler)

P/N: 41-05 yr2000-22

Our Price: $20.00
TPI Sensor Guard for 2 Stroke 150-250-300 KTM XCW TPI/ Husq TEi  GasGas -yr2022 TPI Sensor Guard for 2 Stroke 150-250-300 KTM XCW TPI/ Husq TEi GasGas -yr2022

Protect your throttle position sensor from being damaged by debris and keep your bike running. Replaces the stock lightweight, weak plastic cover. Will  protect your $350+ sensor and ensure you don't get stranded while riding in the fun spots because your bike will not run if the sensor becomes damaged.

Our Price: $35.00
Rear Brake Pedal Plate,adjustable,(angled mount) ALL MODELS 16-2023 yr pn: 88-06 Rear Brake Pedal Plate,adjustable,(angled mount) ALL MODELS 16-2023 yr pn: 88-06

Rear Brake Pedal Plate , angle mounting, 3 way adjustable.

Our Price: $40.00
MOUNT (Hand-Guard End Inserts, HSS, Ground Tap Included) MOUNT (Hand-Guard End Inserts, HSS, Ground Tap Included)

P/N: 77-01

8 mm Hex Wrench cut into each insert, for install and removal.

Our Price: $42.00
Rear Disc Guard, KTM, Husqvarna, 125-501cc, yr 04-2023 Rear Disc Guard, KTM, Husqvarna, 125-501cc, yr 04-2023

Rear disc guard, sharing design points from our proven Front Disc Guard.

_U.H.M.W. plastic outer edge guard, mates to G10 composite "Fin" fastened to the caliper bracket.
What does this all mean.
_ The UHMW plastic is a GLIDE plate concept . When you Crunch into rocks etc, the oil impregnated plastic, lets you slip through the obstacle, with less speed scrubbed off.
_ The G10 fiber composite "FIN" is super strong and incredibly light weight.
_ Both of these pieces have their color molded through out their material thickness. They will not readily show scratches, mashes or bashes or grind marks, as aluminum does after a few rides.
_ A 25 to 20 mm collar is supplied to suit the 20mm axle. Loctite is used to fix in place. (propane torch is used to disassemble, if needed)
_ This is a modular design. It has not occured, but if you need parts, we've got them.
_ Accommodates larger disc sizes.

Our Price: $155.00