 |
 |
 |
 |
Contents:
- Lowering Brackets (Qty. 2)
- Mounting Bolts (Qty. 2)
- Peg pivot pin Pin (Qty. 2)
- Spacer (Qty. 2)
- Washer (Qty. 2)
- Cotter Pin (Qty.2)
- Stock springs are reused
Notes:
- Drops foot peg location 12mm from stock.
- Opens up the rider cockpit giving the seated and standing position a more open feel.
- Helps with control on the brake pedal and shift lever, more adjustment potential.
- Places foot/boot at a lower position at each lever (brake and shift) offering more room to adjust.
- This design keeps your foot pegs centered directly under the swing arm pivot allowing for confident handling.
- Super tough design , milled from Solid block of 4140 , not welded or formed.
Material:
- 4140 Chromium Steel (Fully machined, NOT welded)
Color(s):
- High quality Black chemical etched finish.
Honda:
- CR 125-250 ( aluminum frame , bolted bracket)
- CRF R and X models 250R , 450R , 250X , 450X (aluminum frame, bolted bracket)
- 2003-2024 Uses your stock, OEM footpegs and springs, left and right sides.
- Complete Hardware kit supplied.
- DOES NOT fit steel frame of "L" models.
- Does not fit CRF 150.
NOTE: Check your CRFX for the KICK STAND mounting position.
If mounted to the frame (just above and behind footpeg, as on newer CRF X models the stock kickstand is used. IF mounted to the footpeg bracket ... The kickstand is not used.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Completly machined from Chromium alloy billet stock, then heat treated, stress relieved for greater reliability and wear properties.
|
|
 |
 |
 |
 |

|