You are here: Home > Husqvarna > Guards
Find by Pricing
Below 42 (2)
Sort By:
Page of 1
MOUNT (Hand-Guard End Inserts) TPI Sensor Guard for 2 Stroke 150-250-300 KTM XCW TPI/ Husq TEi GasGas -yr2022 Clutch Case Saver KTM 4 Stroke
P/N: 77-01

 		Protect your throttle position sensor from being damaged by debris and keep your bike running. Replaces the stock lightweight, weak plastic cover. Will  protect your $350+ sensor and ensure you don't get stranded while riding in the fun spots because your bike will not run if the sensor becomes damaged. P/N: 42-45
Clutch Case Saver KTM 4 Stroke Clutch Slave Guard KTM MOUNT (Hand-Guard End Inserts, HSS, Ground Tap Included)
P/N: 42-11

 		P/N: 42-08

 		P/N: 77-01

8 mm Hex Wrench cut into each insert, for install and removal.

Clutch Case Saver KTM 4 Stroke Clutch Cover Guard, KTM, Husaberg 250-300, 2 Stroke 04-12yr Clutch Cover Guard, KTM, Husaberg, 250-350,4 stroke SXF XCF XCW EXC 14-16yr
P/N: 42-65


 		P/N: 43-05


 		P/N: 43-07
Aluminum Clutch Cover Guard for KTM 2013-14 250-300 2 Stroke Clutch Cover Guard,KTM, Husqvarna 450/500, 4 stroke XCW/EXC .. FE/FC.. 12-16yr Clutch Cover Guard, KTM, Husqvarna, 125-150-200, 2 Stroke, SX,XC,XCW...TE,FC 09-16 yr
P/N: 43-08

 		P/N: 43-09

 		P/N: 43-10
Linkage Guard for all Husqvarna models with linkage yr 16-22 Front Disc Guard for dirt bikes Rear Disc Guard, KTM, Husqvarna, 125-501cc, yr 04-2023
P/N: 46-06

 		P/N: 20-05

Press coverage:
https://www.dirtrider.com/system-tech-racing-front... 		Rear disc guard, sharing design points from our proven Front Disc Guard.

_U.H.M.W. plastic outer edge guard, mates to G10 composite "Fin" fastened to the caliper bracket.
What does this all mean.
_ The UHMW plastic is a GLIDE plate concept . When you Crunch into rocks etc, the oil impregnated plastic, lets you slip through the obstacle, with less speed scrubbed off.
_ The G10 fiber composite "FIN" is super strong and incredibly light weight.
_ Both of these pieces have their color molded through out their material thickness. They will not readily show scratches, mashes or bashes or grind marks, as aluminum does after a few rides.
_ A 25 to 20 mm collar is supplied to suit the 20mm axle. Loctite is used to fix in place. (propane torch is used to disassemble, if needed)
_ This is a modular design. It has not occured, but if you need parts, we've got them.
_ Accommodates larger disc sizes.